Features and Benefits
 
 
  1. Retail package!
  2. 1024 Megabytes of memory
  3. Two TXDR1024M500HC2DC model memory DIMMs
  4. Tested and packaged in pairs
  5. CAS Latency : 2-2-2-5
    • Operating voltage : 3.3v~3.45v for DDR500
      2.65v ~ 2.85v for DDR 400
    • PCB Board : 6 Layers PCB
    • Speed : DDR 500Mhz (PC 4000)
      DDR 400 Mhz (PC 3200)
    • Type : 184-pin DDR SDRAM
    • Error Checking : Non-ECC
    • Registered/Unbuffered : Unbuffered
  6. Modules tested together in DFI, and DFI RDX200 mainboards test setup
  7. Packaged together immediately following system stability test.
  8. Benchmarked using Nvidia NForce 3, NForce 4 and ATI chipsets.
Specifications
 
Model / Speed Capacity CL/ Speed DRAM TYPE Voltage TEAM Part Number
PC4000 DDR 500MHz 512MB*2(dual) 2-2-2-5 32*8 3.3~3.45V TXDR1024M500HC2DC
PC3200 DDR400MHz 512MB*2(dual) 2-2-2-5 32*8 2.65~2.85v TXDR1024M400HC2DC
 
Testing Hardware
 
 
standard PCxx00 latency values
Tested at ultra-low latency settings
Procedures:
  • A. Memtest DOS version
  • B. Super pi MOD version 1.4 for 32m calculation passed
  • C. 3Dmark 05 passed
8. Dual channel testing environment:

9. Recommanded components by Team Group Technician:

Mainboard:

  • *1. DFI NF4 series
  • *2. DFI RDX200CF-DR or DFI Xpress3200CF
** Support DDR memory voltage up to 4v; however, Team Group Inc. does not recommand customers apply over 3.5v; Team Group will not be responsible for the loss due to customers do not follow our suggestion.

Power Supply Unit: At least 500W for SLI or Cross-Fire supported; 450w for single PCI-E graphic card

**Specifications subject to change without notice.

**Team Group will NOT honor warranty service either remove the warranty or over voltage due to any Inappropriate overclocking on memory modules.
 
Packaging Information
 
 
ASTAK Inc.
1911 Hartog Drive San Jose, CA 95131 Tel : (408) 453-1188 Fax : (408) 453-1388
E-Mail:sales@astak.com Web Site: http://www.astak.com